Abstract
To develop technologies for the reuse of alloy powders obtained from cobalt-chrome wastes and to evaluate the effectiveness of their use, complex theoretical and experimental studies are required. The main advantage of the proposed technology is the use of waste as raw materials, which is much cheaper than the pure components used in traditional technologies. The purpose of this work was to perform X-ray spectral microanalysis of sintered samples from cobalt-chrome powders obtained for additive technologies by electroerosive dispersion. For the implementation of the planned studies, wastes of the cobalt-chrome alloy of the brand KHMS "CELLIT" were chosen. For the production of cobalt-chrome powders, a device for electro-erosive dispersion of conductive materials was used. As a working fluid, butyl alcohol was used. The powders are consolidated by the method of spark plasma sintering using the system of spark plasma sintering SPS 25-10. Using the energy-dispersive X-ray analyzer from EDAX, built into the scanning electron microscope QUANTA 200 3D, spectra of characteristic X-ray radiation were obtained at various points on the surface of the sample. It has been experimentally established that Co and Cr are mainly contained in cobalt-chrome powder-alloys on the surface.Keywords
Array
Array
Array
References
Karlsson J., Snis A., Engqvist H., Lausmaa J. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions. Journal of Materials Processing Technology, 2013, Vol. 213 (12), pp. 2109–2118.
Safdar A., He H.Z., Wei L.Y., Snis A. et al. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti–6Al–4V // Rapid Prototyping Journal, 2012, Vol. 18 (5), pp.401–408.
Loeber L., Biamino S., Ackelid U. et al. Comparison of Selective Laser and Electron Beam Melted Titanium Aluminides. Conference paper of 22nd International symposium “Solid freeform fabrication proceedings”, University of Texas, Austin, 2011, pp. 547-556
Gu D.D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Reviews, 2012, Vol. 57 (3), pp. 133-164
Wang Z., Guana K., Gaoa M. The microstructure and mechanical properties of deposited-IN718 by selective laser melting. Journal of Alloys and Compounds, 2012, Vol. 513, pp. 518–523
Ageev, E.V. Electroerosive Powder Obtained from Alloy VK8 Waste into Butanol / E.V. Ageeva, A.Yu. Altukhov , S.V. Khardikov , S.S. Gulidin , A.N. Novikov // Journal of nano- and electronic physics. – Vol. 7, No 4, Part 2, 2015 – P. 04080(3)
Ageevа, E.V. X-ray Analisis of the Powder of Micro- and Nanometer Fractions, Obtained from Wastes of Alloy T15K6 in Aqueous Medium / E.V. Ageeva, E.V. Ageev , S.V. Pikalov , E.A. Vorobiev , A.N. Novikov // Journal of nano- and electronic physics. – Vol. 7, No 4, Part 2, 2015 – P. 04058(2).
Ageevа, E.V. Studing Tungsten-containing Electroerosion Powders and Alloys Synthesized from Them / E.V. Ageevа, E.V. Ageev, V.Yu. Karpenko, A.S. Osminina // Journal of nano- and electronic physics. – 2014. – Vol. 3. – P. 03049-1– 03049-3.
Ageeva, E.V. Production of copper electroerosion nanopowders from wastes in kerosene medium / E.V. Ageeva, E.V. Ageev, N.M. Horyakova, V.S. Malukhov // Journal of nano- and electronic physics. – 2014. – Vol. 3. – P. 03011-1 - 03011-3.
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).