Abstract
Development and improvement of product compliance, where the relevant technical security, especially system components and resources that are exploited in traffic, requires the necessary level of quality that was both competitive and global market. On the other hand, one of the conditions for the promotion of exports of domestic products is to increase the competitiveness of products, meeting the technical regulations, so in terms of production quality, and maintenance.
When it comes to the proper functioning of the brake system of railway vehicles significantly affected by the maintenance system. Bearing in mind that the brake system must meet a number of quality requirements, legislation from the standpoint of safety and high reliability in all modes, this paper describes the dynamics of maintenance with special focus on the share of costs in relation to the price of the device braces system. It is a domestic product industry hydraulics and pneumatics Trstenik, a special section relating to the sealing method, the most sensitive part of the device of the brake system of railway vehicles.
Keywords: maintenance, rolling stock, brakes, seals, compliance, adjustment
Keywords
Array
Array
Array
Array
Array
Array
Array
References
Basim Al-Najjar: „Just in time dynamic & cost-efective maintenance (JIT DMAINT) for more reliable production: a case study“, School for Engineering Linnaeus, UniversitySweden, Journal of Applied Engineering Science (JAES), No. 2, 2012, Vol.10, Mechanical faculty Belgrade, , ISSN 1451-4117, doi:10.5937/jaes 10-2132, UDC 33, p.107-115.
Čatić D., Tomić R., Pantić R.: „Steering of the light industrial vehicle”, Third International Conference Heavy Machinery – HM ’99, Kraljevo, 27-30. October, 1999., p.4.32-4.37.
Daley, S., Newton, D.A., Bennett, S.M., Patton, R.J.:“ Methods for fault Diagnosis in Rail Vehicle Traction and Braking Systems“, Mech. Eng. Centre, Eur. Gas Turbines Ltd., Leicester, Conference Publications, Qualitative and Quantitative Modelling Methods for Fault Diagnosis, IEE, 5/1-513, 1995.
Hong-Je Ryoo, Jong-Soo Kim, Do-Hyun Kang, Geun-Hie Rim,Yong-Ju Kim, Chung-Yuen Won: „Design and Analysis of an Eddy Current Brake for a High-Speed Railway Train with Constant Torque Control“, Centre of Ind. Application, Korea Electrotechnol. Res. Inst., Changwon, Conference Publications, Industry Applications Conference, Conference Record of the 2000 IEEE, p. 277-281.
Internal documents, Industry of Hydraulics and Pneumatics »Prva petoletka«-Trstenik, (regulations, procedures, guidelines, software testing, reports, catalogs )
Jovančić M., Tomić R., Pantić R., „Basic aspects of maintaining the vacuum system for heat treating furnaces“, 2 DQM Conference maintenance management'' '99'', Čačak, 1999., p.174-178.
Luo Min, Wu Meng-lin; Wang Xiao-yan: „Study On Reliability Test For Brake Control Execution Unit Of Rail Transit Vehicle“, Railway &Urban Transit Inst., Tongji Univ., Shanghai, China, Conference Publications, p. 1-4, 2010.
Marković Z., Petrović P.:"Primena metode statističke kontrole procesa (SPC) sa aspekta kvaliteta proizvoda’’, Journal JUSK-a, No. 2, Vol.26, 1998.,p. 143-147.
Pacaiova H., Glatz J., Kacvinsky S., „Pozitive and negative aspect in application of maintenance management philosophy“, Technical University of Kosice, Slovakia, Journal of Applied Engineering Science (JAES), No. 2, 2012, Vol.10, Mechanical faculty Belgrade, , ISSN 1451-4117, doi:10.5937/jaes 10-2132, UDC 33, p.99-105.
Popović P.: „Technical diagnostics and maintenance technology "- Analysis of reliability and maintainability engineering systems, University Singidunum, Excerpts lectures, 2010.
S.Vukadinović: „Elementi teorije verovatnoće i matematičke statistike“, drugo izdanje,1978., Privredni pregled.
Series of standards ISO 9000 and DIN 53 000.
Standard EN 50126.
Todorović J., Zelenović D.: „Efektivnost sistema u mašinstvu“, Naučna knjiga, Beograd, 1981.
Tomić R., Đurđević Ž.: „Key issues in the maintenance of hydraulic systems based on components and devices of the IHP program'' ,“PPT'' Hip-2000, Vrnjačka Banja, p.199–207.
Tomić R.,Bijelić S.,Tonić M.:“Basic principles on the quality of maintenance of mechanical systems in terms of optimal management of spare parts“. (special topics, review), OMO, XXV, No. 2-3, Belgrade, 1996., p.101-108.
Tomić R.,Jovančić M., Radovanović M., „Contribution to maintenance of brakes of the railway vehicle based on products made in IHP“, “Prva petoletka”, RaDMI 2002.,Vrnjačka Banja, p.1443-1452.
Tomić R.:„Appendix objectification of domestic developments in relation to the quality system ISO 9000“, 5 DQM Conference "Dependability and Quality Management", 2002., Belgrade, p.267–273.
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).