Abstract
The article provides a brief description of a prototype of a new grinding equipment – a labyrinth disintegrator, manufactured according to our developments, as well as the results of semi-industrial tests on various materials with different hardness and brittleness. A scheme for grinding the material and a dynamic scheme for moving the material through the labyrinths are presented. The results of sieve analyze of selected materials are presented, and granulometric curves for the distribution of particles of materials are constructed.
Keywords
References
Rosenow, J., Cowart, R., Thomas, S., (2018) Market-based instruments for energy efficiency: a global review, vol.12, 5-th release, 1379-1398, DOI: 10.1007/s12053-018-9766-x.
Dudak, N., Taskarina, A., Kasenov, A., Itybaeva, G., Mussina, Z., Abishev, K., Mukanov, R. (2017) Hole Machining Based on Using an Incisive Built-Up Reamer. International Journal of Precision Engineering and Manufacturing, vol.18, Issue 10, 1425-1432, DOI: 10.1007/s12541- 017-0170-9.
Xu, Y., Zhang, B., Feng, G. (2022) Electromagnetic design and thermal analysis of module combined permanent magnet motor with wrapped type for mine ball mill. IET Electric Power Applications, 16(2),139–157, DOI: 10.1049/elp2.12141.
Gao, MW, Forssberg, E. Prediction of product size distributions for a stirred ball mill, vol.84, P 101-106, DOI: 10.1016/0032-5910(95)02990-J.
Romanovich, A.A., Romanovich, L.G., Chekhovskoy, E.I. (2018) Determination of rational parameters for process of grinding materials pre-crushed by pressure in ball mill, IOP Conference Series: Materials Science and Engineering,vol.327, Issue 4, DOI: 10.1088/1757-899X/327/4/042091.
Lucie, D., Pavel, K., Michaela, R., Martin, D., Karel, D., Melita, M., Ladislav, C. (2018) Optimization of molybdenum powder milling parameters.Obrabotkametallov-metal working and material science, № 3, 109-122, DOI: 10.17212/1994-6309-2018-20.3-109-122.
Yu, Y., Guo, PQ., Cao, YK., Wang, XW., Zhang, P., (2012) Development and Key Technologies of High-speed Grinding. Materials Science Forum,vol.723, 445-449, DOI: 10.4028/www.scientific.net/MSF.723.445.
Tukarambai M., Hemanth Varma M.S., Raju ChA.I. (2020) Batch grinding studies by a ball mill for hematite ore,10th International Conference of Materials Processing and Characterization, ICMPC 2020,vol.26, 825 - 832DOI: 10.1016/j.matpr.2019.12.425
Osnovymetallurgii. T. 7. Tekhnologicheskoeoborudovaniepredpriyatijcvetnojmetallurgii. – M. :Metallurgiya, 1975, 255-256.
Taskarina, A.ZH., Abdrahmanov, E.S., Tusupbekova, M.ZH., Tyulyubaev, R.A., Dejgraf, I.E. (2021) Konstrukciyanovogorazmalyvayushchegooborudovaniya.Mezhdunarodnayanauchno-prakticheskayakonfe-renciya «XIII Torajgyrovskiechteniya». – Pavlodar: Torajgyrovuniversitet, vol. 4, 241-245
Centrobezhnyjizmel'chitel' vstrechnogoudara RU 2150323C1, MPK V02S13/20, 10.06.2000.
Centrobezhnyjdiskovyjizmel'chitel' RU2739426C1, MPK V02S 7/00 V02S 13/2024.12.2020.
Kurytnik, I., Nussupbekov, B.R.,Khassenov, A.K.,Karabekova, D.Z.(2015) Disintegration of copper ores by electric pulses, vol.60, 2549-2551, DOI: 10.1515/amm-2015-0412
Semikopenko, I.A., Belyaev, D.A.(2021)Theoretical study of the kinetics of material destruction in a disintegrator with a preliminary grinding unit.Lecture notes in civil engineering, vol. 160, 161-167,DOI:10.1007/978-3-030-75182-1_22
Zheng Y., Kuznetsova M.M., Ved’ V.E., Aleksina A.A.(2016) Experimental studies of the energetically effective conditions of grinding of solids. Technical Physics, vol. 61,№ 5, 703-706, DOI:10.1134/S1063784216050273
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).