Abstract
The presented paper analyses the applicability of the Anivi-Sturtevant dynamic classifier in production of crushed aggregate in a quarry. This dynamic air classifier allows separation of fine particles of smaller sizes than 0.063 mm from materials that have excessive amounts of these particles. This is executed in order to recover materials that would otherwise be deposited only as waste materials. The research included an experiment in a quarry following predefined methodology. By regular sampling of materials and their subsequent testing, the particle size distributions of grains were plotted, and also depending on the input moisture or due to the separation of fine particles. The operation of the classifier consumes electrical energy and from this point of view, it is necessary to monetize the output profitably. A modelling process has been implemented where the 0/4 mm fraction produced by Anivi is mixed into the commonly produced fraction 0/4 certified or into mixtures of 0/32 or 0/63.
Keywords
References
Darmann, S. (2014). Optimization of an Air Classifier. Diploma Thesis. Graz: Technical University, 86 p.
Shapiro, M. & Galperin, V. (2005). Air Classification of Solid Particles: A Review. Chemical Engineering and Processing, vol. 44: 279-285. DOI: 10.1016/j.cep.2004.02.022
Furchner, B. & Zampini, S. (2009). Air Classifying. Ullmann’s Encyclopedia of Industrial Chemistry, vol. 2: 215-234. DOI: 10.1002/14356007.b02_17.pub2
Leschonsi, K. & Legenhausen, K. (1992). Investigation of the Flow Field in Deflector Wheel Classifiers. Chemical Engineering and Processing: Process Intensification, vol. 31(2): 131-136. DOI: 10.1016/0255-2701(92)85007-O
Klumpar, I., V., Currier, F., N., Ring, T., A. (1986). Air Classifiers. Chemical Engineering, vol. 3: 77-92.
Kukuricasova, J. (2017). Application of Technology to Reduce Fine Particles in the Final Product in a Quarry Bystřec. Bachelor Thesis. Ostrava: VŠB-Technical University of Ostrava, 59 p. (in Czech)
Anivi Ingenieria. (2010). Dry Process – Grinding and Micronizing. Technical Report. Bilbao: Anivi Ingenieria, S. A., 12 p.
Anivi Ingenieria. (2006). High Fineness Classification. Technical Report. Bilbao: Anivi Ingenieria, S. A., 8 p.
Klumpar, I., V., Zoubov, N., N. (1985). New Sturtevant High Efficiency SD Classifier at Keystone Cement. World Cem., vol. 10: 23-29.
Anivi Ingenieria (2016). Machine: „ANIVI-STURTEVANT“ Dynamic Classifier. Technical Report. Bilbao: Anivi Ingenieria, S. A., 10 p.
Anivi Ingenieria. (2016). Classifier type A.S. – Spare Parts. Technical Report. Bilbao: Anivi Ingenieria, S. A., 1 p.
Botula, J., Vidlar, J. (2018). Mineral Waste Treatment II – Branching Processes. Ostrava: VŠB-Technical University of Ostrava, 132 p. (in Czech)
Barimani, M., Green, S., Rogak, S. (2018). Particulate Concentration Distribution in Centrifugal Air Classifiers. Mineral Engineering, vol. 126: 44-51. DOI: 10.1016/j.mineng.2018.06.007
Sturtevant (2015). Sturtevant – Solutions for Stone, Sand and Gravel. Technical Report. Hanover: Sturtevant, Inc., 12 p.
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).