Abstract
Irregular structures present a particular design challenge for structural engineers, especially if they are located in seismically active areas. It has been observed that in earthquake-affected areas, structures with a configuration classified as torsionally irregular are more prone to damage than regular structures. Modern seismic provisions have introduced criteria for determining if the structure is torsionally sensitive and guidelines for designing them. Eurocode 8 introduces analitical criterion for checking torsional irregularity with the measures such as torsional ratio and the radius of gyration. If structure is classified as torsionally sensitive, it implies limited structural nonlinear behavior, so the design code prescribes use of reduced behaviour factor, use of 3D model and at least modal analysis as structural investigation method. In order to asses provisions given in Eurocode 8 total 18 structures with different layouts and number of floors were analysed and results presented in this paper. Six layouts of structure were created by varying the position of structural elements in order to create different levels of torsional irregularity. Also, number of stories was varied and structures with 6, 9 and 12 were analysed. Effects of static as well as of accidental eccentricity were considered. The obtained results have shown that with only one level of criteria for torsional irregularity given in Eurocode 8, structures with similar configuration can be classified as torsionally regular of irregular. By classifying structure as torsionally sensitive and applying reduced behaviour factor, significant increase of strength capacity is equally imposed on all elements not only elements that are close to perimeter of structure.
Keywords
References
Goel, R.K., & Chopra, A.K. (1990). Inelastic seismic response of one-story, asymmetric-plan systems (Report No. UBC/EERC – 90/14). College of Engineering, University of California at Berkeley. https://doi.org/10.1002/eqe.4290200302
European Committee for Standardization. (2004). EN 1998-1-1: Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings, pp. 49-50, 54. European Committee for Standardization.
Avramidis, I. at all (2016). Eurocode-Compliant Seismic Analysis and Design of R/C Buildings. Geotechnical, Geological and Earthquake Engineering, pp. 318-333, 463-472. Springer. ISBN 978-3-319-25269-8, https://doi.org/10.1007/978-3-319-25270-4
Mrdak, I. (2012). Classification and seismic analysis of torsionally flexible systems according to Eurocode 8. The 4th International Symposium Civil Engineering – Science and Practice – GNP 2012, Žabljak, pp. 743-748. ISBN 978-86-82707-21-9.
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).