Supplementary Files
Abstract
Two problems of purlin design related to bending moment distribution in continuous and in simply supported purlin are considered. Bending moment redistribution in purlin may be realized using bearing spring (BS) elements. Preliminary results of numerical experiments show the substantial reduction of bending moments in purlin thus obtaining less section heights and web thicknesses. The approach to reduction of internal forces in purlins may help in resolving some problems typical for cold-formed thin-walled structures. There may be also some optimization possible relating BS-elements lengths and thicknesses and cross sections.
Keywords
Array
Array
Array
Array
References
Chung K.F., Ho. H.C. (2005) Analysis and design of lapped connections between coldformed steel Z-sections, Thin-walled structures, Vol. 43, Iss. 7, pp. 1071-1090
Chung K.F., Ho H.C. (2004) Structural behavior of high strength cold-formed steel Z-purlins
with overlaps, Seventeenth International Specialty Conference on Cold-Formed Steel Structures, Orlando, Florida, USA, Pp. 777-798
Epstein H., Murtha-Smith E., Mitchell J. (1998) Analysis and design assumptions for continuous cold-formed purlins, Practice Periodical on Structural Design and Construction,
Vol. 2, No. 2, pp. 60-67
Gardner L., Nethercot D. (2011) Designers’ Guide to Eurocode 3: Design of Steel Buildings. EN 1993-1-1, -1-3 and -1-8. Second edition, 161 p.
Hancock G.J., Celeban M., Healy C., Georgiou P.N., Ings N. (1990) Tests of purlins with screw fastened sheeting under wind uplift, NBS Special Publication No. 577, National Bureau of Standard, Washington DC, USA, pp. 319-419
Hancock G.J., Celeban M., Healy C. (1992) Tests of continuous purlins under downwards loading, Proceedings of Eleventh International Specialty Conference on Cold-Formed Steel Structures,St. Louis, Missouri, USA, pp. 155-179
Ho H.C., and Chung K.F. (2002) An experimental investigation into lapped moment connections between Z sections, Proceedings of the Third International Conference on Advances in Steel Structures, Hong Kong, pp. 437-444
Ho H.C., and Chung K.F. (2004) Experimental investigation onto the structural behaviour
of lapped connections between cold-formed steel Z sections, Thin-Walled Structures, Vol. 42, Iss. 7, pp. 1013-1033
Ho H.C. and Chung K.F. (2002) Structural analysis on lapped moment connections between cold-formed steel Z sections, Proceedings of the Second International Conference on Stability and Dynamic, Singapore, pp. 675-680
LaBoube R.A. (1988) Behavior of continuous span purlin system, Ninth International Conference on Cold-Formed Steel Structures, St. Louis, Missouri, USA, pp. 191-203
Luza G., Robra J. (2008) Design of Z-purlins: Part 1. Basics and cross-section values according to EN 1993-1-3, Proceedings of the 5th European Conference on Steel and
Composite Structures EUROSTEEL, Graz, Austria, pp. 129-134
Luza G., Robra J. (2008) Design of Z-purlins: Part 2. Design methods given in Eurocode EN 1993-1-3, Proceedings of the 5th European Conference on Steel and Composite Structures
EUROSTEEL, Graz, Austria, pp. 135-140
Sokol L. (1988) Aspects of the design of purlins in Zsections, Der Metallbau im konstruktiven Ingenieurbau (Festschrift R. Baehre), Karlsruhe, pp. 341-358
Sokol L. (1996) Stability of cold-formed purlins braced by steel sheeting, Thin-Walled Structures, Vol. 25, No. 4, pp. 247-268
- Autori zadržavaju autorska prava i pružaju časopisu pravo prvog objavljivanja rada i licenciraju ga Creative Commons licencom koja omogućava drugima da dele rad uz uslov navođenja autorstva i izvornog objavljivanja u ovom časopisu.
- Autori mogu izraditi zasebne, ugovorne aranžmane za neekskluzivnu distribuciju rada objavljenog u časopisu (npr. postavljanje u institucionalni repozitorijum ili objavljivanje u knjizi), uz navođenje da je rad izvorno objavljen u ovom časopisu.
- Autorima je dozvoljeno i podstiču se da postave objavljeni rad onlajn (npr. u institucionalnom repozitorijumu ili na svojim internet stranicama) pre i tokom postupka prijave priloga, s obzirom da takav postupak može voditi produktivnoj razmeni ideja i ranijoj i većoj citiranosti objavljenog rada (up. Efekat otvorenog pristupa).