Abstract
In hemisphere point temperature (Thp) measurement of continuous casting mold flux, the evaporation of volatiles under high temperature will have a strong impact on the results. Based on the comprehensive analysis of hemisphere point method and its influencing factors, the corresponding volatile-containing mold flux and non-volatile mold flux were selected to get Thp with different heating rates. Combined with the Thp measurement and TG-DSC results, the effect of relevant factors during measuring process were analysed and the way to characterize and evaluate the effects were suggested. Furthermore, an improved method of mold flux melting point test was put forward. The results showed that for non-volatile mold flux, the temperature hysteresis has a greater effect than heat transfer delay and fractional melting. And for mold flux with volatile, the effect of evaporation is greater than other factors. Traditional hemisphere-point method is no longer suitable for the volatile mold flux. In order to get through this problem, improved methods were proposed. One is measuring Thp by traditional way, correcting the composition at the Thp, corresponding Thp with the corrected composition. Another is taking the initial composition, revising the hemispherical point temperature Thp, matching the revised Thp with the initial composition.
Keywords
Array
Array
Array
Array
References
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.