Abstract
The recovery of metals from used lithium-ion battery cathode materials is of both environmental and economic importance. In this study, acid leaching stepwise precipitation was used to separate and recover lithium, iron, and manganese from the mixed cathode material LiFePO4/LiMn2O4. The thermodynamic characteristics of lithium, iron, and manganese metal phases, especially the stability region, were analyzed by Eh-pH diagrams. The sulfuric acid and hydrogen peroxide leaching system released Fe3+, Mn2+, and Li+ ions from the cathode material. Fe3+ in the leaching solution was precipitated as Fe(OH)3 and finally recovered as Fe2O3 after calcination. Mn2+ in the leaching solution was recovered as MnCO3. The remaining Li+-rich solution was evaporated and crystallized into Li2CO3. The purity of the recycled products MnCO3 and Li2CO3 met the standard of cathode materials for lithium-ion batteries. XRD and XPS analysis showed that the main phase in the leaching residue was FePO4. This process can be used to separate and recover metals from mixed waste lithium-ion battery cathode materials, and it also provides raw materials for the preparation of lithium-ion battery cathode materials.
Keywords
References
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.