Abstract
This research focuses on studying the mechanical, tribological, and corrosion behaviors of alloy steels: AISI 4340, AISI 5140, and AISI 8620 by laser hardening, respectively. In light of the tests which have been carried out meticulously, it is concluded that the optimum laser hardening parameter for all steel grades is 4 mm/s scanning speed and 1300 °C surface temperature. Micro-structural changes, Vickers hardness as mechanical properties, and tribological properties with reciprocating wear tests were carried out. Furthermore, corrosion tests were conducted. The test results reveal that the maximum hardness is achieved 50-300 μm below the surface for all laser-hardened steels. Additionally, this study demonstrates that the wear resistance of steel is enhanced by the implementation of laser hardening. This study also determines that laser hardening has a positive impact on lifting the corrosion resistance behavior of AISI 4340 steel. In contrast, the corrosion resistance properties of AISI 8620 steel were reduced nearly by 54.17%.
Keywords
References
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.