Abstract
Most nickel laterite smelting to produce ferronickel is carried out using an AC-arc furnace. Although the DC-arc furnace is advantageous in the smelting of fine ore, it is rarely used for nickel laterite. In this work, the effects of slag basicity and stoichiometry of reductant addition during smelting of low-grade saprolitic nickel ore on nickel content and nickel recovery, yield, and phases of the slag were studied in detail. The smelting process was conducted in a laboratory DC-arc furnace with a a single electrode of 30 cm diameter. A 5 kg of low-grade saprolitic nickel ore (1.92 Ni-12.97 Fe), some coke as reductant, and some limestone as flux were smelted in a DC-arc furnace for about one hour. The pouring temperature of hot metal and slag was 1400-1500 °C. The basicity of the quaternary slag of 0.8 and the stoichiometric carbon of 0.8 of the reductant resulted in an optimum smelting process of nickel ore in a DC-arc furnace, producing ferronickel with a Ni content of 14.59% with 92.26% recovery.
Keywords
References
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.