Abstract
At present, amorphous boron powder is considered to be the best fuel for solid fuel-rich propellants due to its extremely high volume calorific value and mass calorific value. Amorphous boron powder produced by magnesium thermal reduction contains many impurities that are insoluble in acids. In addition to impurities, oversized particles, and limited chemical reactivity, these issues significantly restrict the extensive use of this material in military and aerospace sectors. In this paper, the soluble transformation mechanism of insoluble boron magnesium compounds in amorphous boron powder at calcining and a method to purify boron powder were studied. To remove insoluble boron magnesium compounds in amorphous boron powder, insoluble impurities Mg2B2O5 and MgB4 were directionally transformed into soluble MgB4O7 and MgO at calcining. The samples were subsequently subjected to water or acid leaching to convert the crude amorphous boron powder product to high purity. SEM-EDS, XRD, XPS, and other techniques were used to determine the occurrence states of impurity phases. The transformation of impurity phases after calcining water leaching and acid leaching was monitored. The results showed that the magnesium content in the amorphous boron powder was reduced to 0.96%, and the purity of boron powder was increased to 97.34%.
Keywords
Array
Array
Array
Array
References
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.